[ NOKIA mobile ]

To check the IMEI (International Mobile Equipment Identity) Type-

            *#06#

Information you get from the IMEI-

XXXXXX  XX  XXXXXX  X

    TAC      FAC     SNR      SP

• TAC = Type approval code
• FAC = Final assembly code
• SNR = Serial number
• SP    = Spare

To check the phones Software revision type-

        *#0000#

Information you get from the Software revision-

V 05.31

18-02-99

NSE-3

• 1ST Line  = Software revision
• 2ND Line = The date of the software release
• 3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

• Serial number (IMEI)
• Production date (MM/YY)
• Purchase date (MM/YY) You can only enter the date once.
• Date of last repair (0000=No repair)
• Transfer user data to another Nokia phone via Infra-Red

Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

THE REBOOT TRICK

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)

2. Make a note or reminder.

3. Enter some text into the edit box.

4. Hold "Clear" until the whole text is cleared, then press "Back".

5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)

6. Enter 4 digits (e.g. 1234).

7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).

8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR CALL QUALITY

To activate EFR (Enhanced Full Rate) Enter the code-

*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code-

#3370#

THE JAMES BOND TRICK

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

NETWORK MONITOR

There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2. Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6. If you have v5.24 then change the address "0378" from "00" to "FF".
7. Write the new data to the EEPROM and solder it back to the phone,
8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

• Carrier number
• MS RX Level in DBM
• Received signal quality
• MS TX power level
• C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.
• RTL (Radio link timeout).
• Timeslot
• Indication of the transmitter status
• Information on the Network parameters.
• TMSI (Temporary Mobile Subscriber Identity).
• Cell identification (Cell ID, Number of cells being used).
• MCC (Mobile country code)
• MCN (Mobile network code)
• LAC (Location area code)
• Ciphering (On/Off)
• Hopping (On/Off)
• DTX (On/Off)
• Discard cell barred information

CHECK SIM-LOCK

Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35.

This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.

There are 4 different locks on your Nokia phone.

• COUNTRY-LOCK
• NETWORK-LOCK
• PROVIDER-LOCK
• SIMCARD-LOCK

The code to read out the sim-lock status of your phone is

#PW+(MASTERCODE)+(Y)#

• # = DOUBLE-CROSS
• W = PRESS "*" THREE TIMES
• P = PRESS "*" FOUR TIMES
• + = PRESS "*" TWO TIMES
• MASTERCODE = 1234567890
• Y = NUMBER 1 TO 4

The master code is a secret code. The code has 10 digits, To read out the sim-lock status you can enter every combination you want!

"Y" Shows the status of the network-lock. Here you can enter a number from "1" to "4". The "4" is for the sim-card lock.

SIM-LOCK CHECKS

• #PW+1234567890+1# = GIVES PROVIDER-LOCK STATUS
• #PW+1234567890+2# = GIVES NETWORK-LOCK STATUS
• #PW+1234567890+3# = GIVES COUNTRY-LOCK STATUS
• #PW+1234567890+4# = GIVES SIM-CARD-LOCK STATUS.

Waggle Mixed Codes

Code Description of Nokia codes :
These Nokia codes will work on most Nokia Mobile Phones
(1) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370#
(2) *3370# Activate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced my approx. 5%
(3) *#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
(4) *#4720# Deactivate Half Rate Codec.
(5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.
(6) *#9999# Phones software version if *#0000# does not work.
(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). (
(8) #pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
(9) #pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w”
and “+” symbols).
(12) *#147# (vodafone) this lets you know who called you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that “All Calls” are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the “Call Waiting” status of your phone.
(18) *#61# Allows you to check the number that “On No Reply” calls are diverted to.
(19) *#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.
(20) *#67# Allows you to check the number that “On Busy Calls” are diverted to.
(21) *#67705646# Removes operator logo on 3310 & 3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible.
(24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
(26) *#8110# Software version for the nokia 8110.
(27) *#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on “All Calls” diverting to the phone number entered.
(30) **61*number# Turn on “No Reply” diverting to the phone number entered.
(31) **67*number# Turn on “On Busy” diverting to the phone number entered.
(32) 12345 This is the default security code.
lot;’s of more hidden codes here>>
press and hold # Lets you switch between lines NOKIA 5110/5120/5130/5190 IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4 NOKIA 6110/6120/6130/6150/6190 IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 # NOKIA 3110 IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 # NOKIA 3330 *#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you’ll be presented with the programming menu.
2) Select “NAM1″
3) Select “PSID/RSID”
4) Select “P/RSID 1″
Note: Any of the P/RSIDs will work
5) Select “System Type” and set it to Private
6) Select “PSID/RSID” and set it to 1
7) Select “Connected System ID”
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don’t know yours,
ask your local dealer for it. Select “Alpha Tag”
9) Enter a new tag, then press OK
10) Select “Operator Code (SOC)” and set it to 2050
11) Select “Country Code” and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code *#92772689#

[IMportant for karbonn mobile ]

 factory reset code   is 1122

[ LG mobile ]

LG Dare – Hidden Service Menu:
a. From the phone dial pad dial
b. ##LGSERVICEMENU (##5473784236368)
c. Service code  000000
LG Dare – Hidden Debug Menu:
a. From the phone dial pad dial
b. ##Debug (##33284)
c. Service code  000000

LG Dare – Hidden Activation Menu (Reset)
a. From the phone dial pad dial
b. *act (*228)
(p.s. reset anything saved in your note pad)
LG Dare - Hidden Program Menu (Services)
a. From the phone dial pad dial (don’t forget to press send after you type it in)
b. ##PROGRAM9700 (##77647269700) (Then Press Send)
c. Service code  000000
LG Dare - Hidden LG Information Menu
a. From the phone dial pad dial
b. #help*help (#4357*4357)

2945#*#                                                To access the test mode of the set

2945*#01*#                                          Use to display the secret menu of LG mobile set

*8375#                                                   Use to display the mobile software version

*#06#                                                     To display the IMEI Number of the mobile

2945#*70001#                                     Use to manage Simlock menu for LG (LG 7010, 7020)

277634#*#                                            To set the defaut settings of mobile

1945#*5101#                                       Use to manage Simlock menu for LG (LG B1200)

2945#*5101#                                       Use to manage Simlock menu for (LG 5200, 510W )

2947#*                                                   Use to manage Simlock menu for (LG 500, 600)

47328545454#                                    To set the defaut settings of mobile

*#07#                                                     To display the SW and IMEI Number

277634#*#                                            To remove the security codes of LG sets

or 47328545454#

* 6861 #                                                 To recount checksum

##2342                                                  Apply to resets the set advanced settings 

##786                                                    Used to reset the mobile memory and life timer

##889                                                    To Enable the TTY

#PWR 668                                            To perform the Factory test

  On the main screen type *#06#

Information you get from the IMEI (International Mobile Equipment Identity)
    XXXXXX     XX     XXXXXX    X
        TAC      FAC       SNR     SP

TAC = Type approval code of your LG Mobile
FAC = Final assembly code of your cellphone
SNR = Serial number of your LG Phone
SP = Spare O

  LG all models test mode:
  Type 2945#*# on the main screen.
  2945*#01*# Secret menu for LG
  IMEI and SW (LG 510): *#07#
  Software version (LG B1200): *8375#
  Recount cheksum (LG B1200): *6861#
  Factory test (B1200): #PWR 668
  Simlock menu (LG B1200): 1945#*5101#
  Simlock menu (LG 510W, 5200): 2945#*5101#
  Simlock menu (LG 7020, 7010): 2945#*70001#
  Simlock menu (LG 500, 600): 2947#*

  LG-U81XX SPECIAL CODES
  Code to read phone version :
  - Phone without SIM
  - Enter 277634#*# or 47328545454#
  - Select 'SW Ver.info'
  Code to reset phone :
  - Phone without SIM

  - Enter 277634#*# or 47328545454#
  - Select 'Factory Reset'

  Code to enter UNLOCK MENU :
  - Phone wit SIM inside
  - Enter 2945#*88110#
  Test Menu 8330 : 637664#*#
  Test Menu 8180 V10a: 49857465454#
  Test Menu 8180 V11a: 492662464663#
  Test Menu 8130-8138: 47328545454#
  Test Menu 8110-8120: 277634#*